Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 00:36 22 Apr 2026 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : PicoMite V6.02.02 betas

     Page 8 of 8    
Author Message
matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 11215
Posted: 04:21pm 20 Apr 2026
Copy link to clipboard 
Print this post

Jan
Sounds like a system stack issue, I'll reduce the heap to 316 from 320 in the next beta.
 
Frank N. Furter
Guru

Joined: 28/05/2012
Location: Germany
Posts: 1079
Posted: 04:52pm 20 Apr 2026
Copy link to clipboard 
Print this post

@matherp:

Thank you very much for fixing the bug and enhancing the text viewer!!!  

Frank
 
terekgabor
Regular Member

Joined: 02/01/2026
Location: Hungary
Posts: 49
Posted: 05:21pm 20 Apr 2026
Copy link to clipboard 
Print this post

Peter!

Thank you for all bugs repair, I will try the new beta in the evening.

Many thanks for your work again!

G@bor
 
terekgabor
Regular Member

Joined: 02/01/2026
Location: Hungary
Posts: 49
Posted: 06:58pm 20 Apr 2026
Copy link to clipboard 
Print this post

Peter!

I tested long lines, mark mode behavior.
Working good, only one thing I found.
I really can’t remember how was it in previous versions.
If I mark line(s) or char(s) then unmark them (move the cusror opposite direction) chars or lines looses its color in editor and became black and white.
Then if I exit from mark mode with ESC or F4 or F5 colors are coming back.

All other are working good including profiling pages!

G@bor
 
mozzie
Senior Member

Joined: 15/06/2020
Location: Australia
Posts: 277
Posted: 02:22pm 21 Apr 2026
Copy link to clipboard 
Print this post

G'day Peter,
Using V6.02.02B8, if PEEK(STEPPER ACTIVE) is used before the stepper system is initialised, or after STEPPER CLOSE, this causes the PicoMite to lock up, only hard RESET will fix.

> option list
PicoMiteHDMI MMBasic USB RP2350A Edition V6.02.02B8
OPTION SERIAL CONSOLE COM2,GP8,GP9
OPTION FLASH SIZE 4194304
OPTION COLOURCODE ON
OPTION KEYBOARD US
OPTION RESOLUTION 800x480 @ 333000KHz
OPTION DISPLAY 40, 100
OPTION SDCARD GP22, GP2, GP3, GP4
> ? peek(stepper active)
      (no response)


Just experimenting on a PicoMiteHDMIUSB at the moment, usually use base PicoMiteRP2350

Further to my previous post, it is probably best to leave the enable signal as is, I will post a circuit on the Stepper Thread that should work.

Regards, Lyle.
 
     Page 8 of 8    
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2026